Haltech R32/33 Platinum Pro Plug-in

R32/33 Platinum Pro Plug-in

• Direct plug and play replacement of the OEM ECU, no rewiring necessary.

• Uses the cars factory sensors

• Supports R32 GT-R twin MAF sensors

• Supports Sequential Injection (peak and hold) and Direct fire ignition

• Windows 2000, XP, Vista compatible software

• Real time programming, instant hesitation free adjustment while engine is running

• Fully user definable 32 x 32 mapping

• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)

• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)

• Wideband “auto tuning” using user definable target AFR table

• USB and CAN Communication Port

Factory Outputs:

• 6 x Fuel Injector outputs

• 6 x Ignition outputs

• Tacho, Boost Control, AC Clutch Relay, Idle Control

• Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed)

• N-VCT ( Nissan Variable CAM Timing Control)

Factory Inputs:

• MAF sensors, Throttle Position Sensor, Oxygen sensors,

• Coolant Temperature sensor, Vehicle Speed Sensor,

• Air Temperature sensor.

Expansion I/O*:

• 2 x Analogue Voltage inputs

• 2 x Analogue Temperature inputs

• 4 x Digital pulsed outputs

*Optional auxiliary harness required to be purchased Haltech Part # HT040003

Functions:

• Closed Loop O2 Control

• Decel Cut Over Boost Rev Limiter

• Closed & Open Loop Boost Control

• Gear Setup

• ACF On Base Tables

• Transient Throttle Enhance

Correction Tables: Fuel Ignition Boost:

• Cranking

• Air Temp Target Correction

• Coolant Temperature Correction

• Map Correction

• Zero Throttle Gear Correction

• Cylinder Trim

• TPS Correction

• Generic Correction 1

• Generic Correction 2

• Gear Correction

• Post Start

• Air Temp Duty Correction

• Post Start

Miscellaneous:

• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data

• Max 20 channels logging capability

• Tune can be password protected in software

• Rugged anodized aluminum casing

Power Requirements:

Source: 8.6 to 16.5 Volts DC

Consumption: 530mA @ 12Volts DC

Physical Dimensions:

ECU Dimensions Length: 154mm (174mm with MAP nipple)

Width: 158mm Height: 42mm Weight: 680g (1.5 lb)

Applications: Nissan Skyline R32, Nissan Skyline R33

Variations: GT-R, GTS-t

Engine Codes: RB25DET, RB26DETT

Transmission: Manual only (Automatic not supported)

The R32/33 Platinum Pro Plug-in Kit includes: Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)